There is always a lot going on at Ten4 for both our team and clients. Here’s a little of what’s been happening lately.
Congratulations to Connor Glavish who, after 4 years of hard slog, has qualified as a Heavy Fabricator.
With three separate divisions, spread across two premises, effective planning, systems and communications are essential to keeping everyone on the same page.
We’ve taken on another premises down the road at 14D Gumdigger Place for our Manufacturing Division. Shaun Dodd heads up the operations there...
The ten4 Design division has grown to a team of three and is now headed up by Glenn Scoles who started with us as an apprentice fabricator...
Our team continues to grow and with that comes the need for further management and admin support. Meet our Front Office team that keeps things running smoothly...
Richard and Scott (qualified Heavy Fabricators) have just completed this level 3 traffic management truck for local company T8 Traffic Management.
We’ve just finished a series of very complex builds for Fulton Hogan. We are so experienced we could do the job blindfolded… well not really, but it felt like we were working that way thanks to Covid supply delays
At Ten4 we believe the best way to learn is by getting stuck in. Apprentice Alister Nicholl has been with us for 4 months and it’s been a steep learning curve!
Jacob Monk completed the build of this Level 1 Traffic Management Truck. What made it so remarkable is that he had no chassis to work with!
With just 10 month’s experience under his belt, apprentice Wilson Hookway has manufactured this storage rack for a local traffic management company.
Vance Delaware, a qualified Heavy Fabricator, took just 6 weeks to complete this Tipper Unit for McKenzie Earthmoving.
Our Manufacturing Manager, Shaun Dodd, reckons third year apprentice Connor Glavish “is on fire”.
Our third year apprentice Connor is all smiles after single-handedly completing this manufacturing build of a Service Truck for Keith Andrews in Whangarei
We've just completed the build of two new tipper units for Northland Waste. There's a bathtub tipper and a flat deck tipper.
We designed, built and installed these Nikau palm fronds that sit atop concrete trunks made by some very creative locals at Matapouri beach.
We have a skeleton staff available for emergency repairs and support until the lockdown ends.
Check out this 2021 Mercedes Atego, 3 berth, 9.5m Motorhome designed an built by Ten4. It's got every bell and whistle... the perfect home away from home.
We recently completed this log bunker unit for China Forestry Group in conjunction with Ian Newey logging. The design is the first of its kind in NZ.
We were very proud to sponsor the Pohe Island Super Special Stage at this year’s International Rally of Whangarei 2021.
Former apprentice, Glenn Scoles is now a Design Engineer. His advice to anyone offered an apprenticeship, is to “grab it with both hands"...
As part of a campaign to attract 3 new apprentices, we've been running some press articles about former apprentices. Here's Jayden Carter's story...
As part of a campaign to attract 3 new apprentices, we've been running a series of press articles on what past apprentices have achieved.
As part of a campaign to find staff, we've been running some press articles profiling former apprentices. Here's an article on Jacob Monk.
We recently joined other local businesses to sponsor a Charity Golf Tournament to raise funds for Soul Food Whangarei.
During work hours Gareth Eady is the Repairs & Maintenance Manager at Ten 4 but after-hours he's Mr Adrenaline!
Congratulations to Jacob Monk who completed his apprenticeship in October 2020 and is now a fully qualified Heavy Fabricator.
We're part way through the build of this Structures Truck for the Auckland Motorway Alliance which will be used to repair guardrails.
We salvaged and repaired the compactor from an old truck and fitted the remodelled components to a new cab and chassis
We've just put the finishing touches on this Bathtub Tipper for Fulton Hogan in Auckland. There's a place for everything and everything is in its place!
From the outside this looks like a deceptively simple unit but this mobile workshop was a very complex build and took 8 months to complete.
We recently completed this new addition to the fleet. Finished in an eye catching deep red, it has all the bells and whistles.
The Ten4 caravan & MORE FM 'Half Time Heroes' crew was onsite serving free refreshments to the volunteers.
We started with the bare bones and fitted a hooker subframe unit to the truck and then kitted it out with all the bells and whistles.
The mechanics and fitters at the Ports of Auckland have a challenging job to keep their cranes operational.
Recently a local Fire Station purchased a secondhand truck and we had just four days to get it fitted out and ready for service.
Congrats to Murray and the team who took out both the Vodafone Excellence in Large Business Award.
We are LTSA Approved Manufacturer & Repairers and are ASNZS2980 Certified Welders with experience in aluminium.
This mobile demonstration unit was built for the NZ Fire Service. It allows firefighters to safely simulate a kitchen fire.
The Ten4 caravan was on hand to cater for the participants of last night's Santa Run in the Kerikeri Domain.
From tools, parts and custom fittings to signs, sculptural pieces and architectural features, we can design, cut and manufacture whatever you want.
We were really pleased to win the Large Business Category at the Northland Business Excellence Awards.
Congratulations to Ben Sullivan and Jayden Carter who are now fully qualified after completing a 4 year apprenticeship in Heavy Fabrication.